Solar Panel Inspection Checklist for Florida Homeowners
Updated: 6 days ago

An annual solar panel inspection is a performance and safety review of the system already on your home. It is not the same as a home-buyer inspection. A buyer's inspection looks broadly at the property before a sale; this checklist helps an owner confirm that the solar array is producing, the equipment looks safe, the roof interface remains sound, and the records needed for a warranty claim are easy to find.
Florida systems deserve a regular review because heat, humidity, salt air, storms, irrigation overspray, and vegetation affect performance. You do not need to climb onto the roof to begin. Monitoring data, utility bills, ground-level photos, and the inverter can reveal when professional service is needed.
Key Facts
An annual solar system inspection is a performance check, not a full roof or home-buyer inspection.
Production data should be reviewed over several months and compared with weather, shade, and household usage—not judged from one FPL bill.
Homeowners can safely review the monitoring app, visible conditions, and documents from the ground. Electrical testing, roof access, and mounting repairs belong to qualified professionals.
The inspection should include the inverter, wiring, roof penetrations, mounting hardware, panels, and disconnects.
Dated photos, error screenshots, production records, FPL bills, permits, serial numbers, and service reports make warranty and insurance conversations much easier.
What Does an Annual Solar Panel Inspection Cover?
An annual inspection follows the system from sunlight to the utility meter. The reviewer looks at what the panels are producing, how the inverter is reporting, whether the electrical path appears intact, and whether the roof attachments show signs of movement or water intrusion.
The review should answer four practical questions:
Is the array producing close to its expected pattern?
Is any part of the equipment reporting a fault or operating unusually?
Is the roof still protected where solar hardware passes through it?
Do the owner's records prove the condition and history of the system?
The scope can be visual or more detailed. Ask for a written scope before booking a free solar inspection, because some free visits are limited visual checks connected to a sales appointment.
How to Check Solar Production Data
Start with the monitoring app or web portal. Take a screenshot that shows the system name, the date range, current status, and total production. Save the original file rather than relying only on a screenshot inside the app.
Review the following:
Total kilowatt-hours produced during the last 12 months
Production by month, with comparable months from the prior year
Days that show zero production or a missing data connection
Repeated warnings, offline notices, or unexplained gaps
Panel-level or string-level differences, if your system provides them
The time of day when production starts and stops
Look for a change in pattern, not just a lower annual number. A rainy summer, hurricane-related outage, new tree shade, or higher panel temperature can change production without indicating equipment failure. A sudden drop on clear days, one underperforming panel, or a repeated overnight fault is more useful evidence for a service call.
If your monitoring app is offline, do not assume the array is producing zero. Communication equipment can fail while the inverter continues to make power. Compare the app with the inverter's local status and the utility data. A professional can test whether the problem is production, monitoring, or the connection between them.

Compare Your FPL Bill With Solar Output
Your FPL bill and your solar app measure different parts of the system. The app usually reports what the array produced. The bill reports energy imported from the grid, exported credits or net-metering activity, fixed charges, taxes, and the billing period used by the utility.
Use this simple comparison:
Record | What it tells you | Where to find it |
Solar production | Total energy generated by the array | Monitoring app or portal |
Energy delivered by FPL | Power imported from the grid | Utility bill or account portal |
Energy sent to the grid | Exported solar and possible credits | Net-metering or usage section |
Billing period | Dates used for the utility statement | First page of the bill |
System status | Whether equipment reported normally | Inverter and monitoring app |
Match the dates before drawing a conclusion, then compare several months. A higher FPL bill can happen even when the array is healthy if air-conditioning use increased or the billing period was longer. A low bill does not prove that the array is healthy if it includes a previous credit.
If the monitoring app shows normal production but the FPL bill changes sharply, ask for a joint review of the meter, monitoring configuration, export data, and billing dates. Keep the bills and screenshots together in the same inspection folder.
Check the Inverter and Disconnects
The inverter converts the panels' DC electricity into AC electricity used by the home. During a homeowner review, look for a normal operating status, a current date and time, and alerts that remain active. Listen for unusual buzzing or fans that run continuously. Look for water marks, corrosion, insect activity, a burning smell, or heat that seems abnormal for the equipment.
Confirm that the inverter, AC disconnect, rapid-shutdown equipment, and safety labels are visible and accessible. Do not open the enclosure, remove covers, or touch terminals. Solar circuits can remain energized in daylight even when the home's main breaker is off.
Write down the exact alert, time, and whether the system continued producing. A communication alert needs a different response from a ground fault, arc-fault warning, utility-voltage alert, or shutdown. If you smell burning, see smoke, hear arcing, or find water inside the equipment area, keep clear and call a qualified professional.

Inspect Visible Wiring, Roof Penetrations, and Mounting
From the ground, check whether conduit appears secure and whether any cable is hanging, rubbing on a roof edge, cracked, sun-damaged, or chewed by animals. Look for corrosion around outdoor electrical equipment and for water collecting near conduit entries. Do not pull on wires or attempt to retighten fittings.
Inside the attic or ceiling below the array, look for stains, damp insulation, peeling paint, or a musty smell after rain. From the ground, use binoculars or a phone zoom to look for lifted flashing, displaced components, loose clamps, missing hardware, bent rails, or panels that sit at a noticeably different angle.
Document the location of each concern with a wide photo and a closer photo. Do not caulk a penetration, pressure-wash the array, climb on a wet roof, or alter mounting hardware yourself. An incorrect repair can create a leak and complicate both the roof warranty and the solar warranty.
Panel Condition and Florida Warning Signs
Look for cracked glass, delamination, browning, visible hot spots, heavy debris, bird nesting, vegetation shade, and a panel that looks different from its neighbors. Salt air can accelerate corrosion near coastal homes, while hurricane debris can bend rails or shift a panel even when the glass looks intact.
The safest homeowner inspection is ground-based. A professional can inspect the roof surface, connectors, and underside of the array with fall protection and the correct electrical procedures. Do not step on panels; the glass can break, and pressure in the wrong place can damage cells that are not visibly cracked.
What Photos and Reports Should You Save for Warranty Documentation?
Create a digital folder named for the property and year. Keep:
Dated wide photos of the array and equipment locations
Close-ups of the inverter, disconnects, conduit, roof penetrations, flashing, rails, clamps, and labels
Monitoring screenshots showing production totals and error messages
FPL bills used for comparison
Panel, inverter, optimizer, and battery model and serial numbers
Installation contracts, permits, inspection approvals, and commissioning documents
Inspection reports, service invoices, cleaning records, and warranty correspondence
Storm photos, insurance estimates, adjuster notes, and roof repair records
Use the original file date and add a short note describing what the image shows. Include enough of the roof or wall to identify the location, and save reports as PDFs with a backup in cloud storage.
When Should You Call a Professional?
Schedule professional service when the system shows zero production, repeated inverter alerts, unexplained output loss, exposed wiring, roof leaks, cracked glass, corrosion, storm damage, or unusual heat or noise. A professional inspection is also appropriate before a home sale, an insurance claim, a roof replacement, a warranty transfer, or a major electrical upgrade.
Ask whether the visit includes a written report, production review, photos, roof-interface observations, and recommended repairs. Confirm whether the inspection is limited to solar equipment or includes a licensed roofing review.
Frequently Asked Questions About Solar Panel Inspection in Florida
How often should Florida homeowners inspect solar panels?
Review monitoring data monthly and complete a more thorough annual inspection. Inspect again after a hurricane, severe storm, roof work, a new source of shade, or a noticeable production change.
Is a solar inspection the same as a home inspection?
No. A home inspection is a broad property review, often performed for a sale. A solar inspection focuses on annual performance, equipment condition, roof penetrations, mounting, records, and safe operation of the existing array.
Can I inspect my solar panels myself?
You can review the app, FPL bills, visible equipment, and ground-level conditions. Do not climb onto the roof, open electrical equipment, handle wiring, or adjust mounting hardware without the training and safety equipment required for that work.
What should a free solar inspection include?
Ask whether it includes a written report, production analysis, equipment photos, roof-interface observations, and a clear list of repairs. Confirm whether it is independent of a sales proposal and whether any paid work is required after the visit.
Schedule a Florida Solar Inspection
If your monitoring data, FPL bill, or roof photos raise questions, Blue Energy Electric can help review the system and explain the next step. Call (772) 232-6594 or contact our team to schedule service. You can also review our Maintenance service page or estimate your system's potential with the Solar Calculator.





Comments